The following configuration is for BE Broadband / O2 Broadband Specific and will work with an external modem working on RFC1493 / Bridge mode. When it comes to setting up a Cisco Router with a modem under bridge mode, you only need a Layer 3 port to configure the given IP Address. In any Layer [...]
{ 0 comments }
I have been working on some xDSL sync issues and and here are some of my findings to boost the xDSL Sync rate and have a stable line. Option 1 First of all, make sure which standard your ISP’s DSLAM running on. This is important because some standards have limitations which will create a bottleneck [...]
{ 2 comments }
Since Telewest does not use authentication, it can be a bit puzzling if you are going to share your broadband internet connection via a Router. I will be using a LinkSys WRT54GS as an example… Before you do that, it is recommend doing the following… Turn off your modem and your Router for about 5 [...]
{ 0 comments }